|
MINWAX-Water-Based Pre-Stain Wood Conditioner should be applied to bare wood before staining. Helps prevent streaks and blotches by evening out the absorption of oil-based stains. Penetrates the grain of the wood to promote uniform acceptance of oil-based stains. Can be applied over any wood surface but is especially necessary when working with soft or porous woods. Dry time: 15 minutes. Stain application: After 15 minutes but no more than 2 hours. Coverage: 125 sq. ft. per quart. Coats: Normally 1 but additional coats may be applied on highly absorbent woods. Container holds 1/2 pint.
|
